Tooling

Drill bits, carbide (NQ-HQ-PQ sizes), systems and down hole equipment, geotechnical testing equipment

Tooling

DRILL BITS

  • Drag type bits; Polycrystalline Diamond Cutter and  Tungsten Carbide tipped
  • Tri-cone roller bits; Tungsten Carbide and Mill Tooth type up to 17-1/2” diameter
  • Wire-line recovery coring bits; Surface –set, Impregnated Diamond and Tungsten Carbide (NQ-HQ-PQ sizes)
  • DTH Hammer type bits; Tungsten Carbide button type concave and flat face bits

SYSTEMS AND DOWN HOLE EQUIPMENT

  • Continuous wire-line recovery type coring systems in HQ and PQ sizes (NQ available if required)
  • DTH (down the hole) hammer systems from 4” to 8” diameter
  • Stabiliser and collar assemblies for hole diameters up to 17-1/2” diameter
  • Drill-pipe / tubulars (NEW 2008/09); Tool jointed and flush jointed high tensile heat treated drill pipe from 2-3/8” to 4-1/2” diameter with API connections. HQ and PQ drill pipe to suit our wire-line coring systems
  • Cross-over subs; to suit all Drill Force owned connections

GEOTECHNICAL TESTING EQUIPMENT

  • Standard Penetrometer Testing (SPT) systems including split spoons and solid nose extensions
  • Shelby type push tubes in sizes that DO NOT require the core barrel to be removed prior to taking samples
  • Hand held shear vane (calibrated tool)
  • Packer type systems for hydrological formation testing in both straddle and terminal configurations (HQ and PQ sizes). (Access to this item as a rental product, reducing cost to client.)
  • Electric dip meters for measuring and monitoring static water levels (SWL)

OIL FIELD TYPE DRILL COLLARS AND STABILIZERS (DRILL FORCE OWNED)

  • 6" OD, 81ppf, 3-1/2" API IF, Range 1 drill collars
  • 4-1/2" OD, 47ppf, 2-7/8" API IF, Range 1 drill collars
  • 4', 6" 8-1/2", 9-7/8", 12-1/4" and 17-1/2" stabilisers (with and without floats)

SPECIALISED TOOLING

Specialised Tooling
  • PDC under reamers, 6" to 12" and 6" to 16"
  • PDC hole openers, 6" to 9-7/8" and 6" to 12-1/4"
  • DTH hole openers, 6"-8", 6"-10", 6"-12"
  • DTH (down the hole hammers) 3" to 12" size
  • Casing perforators, 6", 8", 10", 12" (-1/4" / +3/4") nominal ID casings
  • Soft ground vehicle tracking / rig pad system, consists of 8' x 4' 36kg pads that can be interlocked and have a 60,000kg rating.
  • Large diameter "Construction / Piling" type augers
  • Test pumps for water aquifer testing
  • Water level recording equipment
© 2017. All Right Reserved By Drill Force
Website Designed & Developed By Stealth Media Ltd.